Last Chance

Peacock Tres Chic is closing on March 1st to prepare for the re-opening.

Last three days to get 40% off everything currently at Peacock Tres Chic! Last chance to get these items, all new stuff will be arriving in March. You won't see these designs again!

Use coupon code LAST3DAYS at checkout to get 40% off!!

Tinker's Folly...

...or rather, my dad's music =)(Dave Leonard)

There are a couple songs, Gypsy Laddie and Captain Jack, that have me and a friend of mine singing backup.
If you're interested =)


Find more music like this on Woody's Music Network

Tutorial: getting rid of those pesky loops and using files

Click on the pictures to see the details!
Most of the settings I use for my crystals and cabochons come with one, and sometimes two, loops on them. Though you can leave these on if you don't intend to use it to connect something, I personally think it looks cleaner if they're taken off. I don't just snip them off, I file down what I call the 'bur' that the metal leaves behind. It gives it a nice finishing touch, that most people won't even notice, but I know I did everything I could to make it perfect.
I use a set of files that are used for modeling gaming miniatures, but they're the same thing as jeweler's files. Mine came from a gaming store, but you can find them online at jewelry supply websites, like these ones from Fire Mountain Gems.

Getting rid of the loop
You can get rid of the loop any way you'd like, you can cut it with flush cutters, or you can bend it off. Using flat nose or chain nose pliers, you can bend the loop up and down a few times and the metal will break at the bend. I prefer this method, I get straighter, more flush cuts.
Note: I have an old beat up pair of flush cutters I use for things like this, so you don't risk knicking up your good wire cutters.
I'm starting with this oval setting, with one loop.

File the bur
I've taken the loop off, but you can see in the picture that there is a metal bur left behind. You can leave it like that, or for that polished look you can file it down. I use the flat file for this. I rarely ever use the round file, but it does come in handy occasionally.
In this next picture you can see how nice and smooth it gets when you file it. You can even get it so you'd never even know there was ever a loop there.

Note:Probably want to do the snipping and filing before the piece is used. I used this green gem, thinking I was going to use the loop and dangle something from the bottom. I decided I didn't like it, and proceeded to take the loop off. It's much harder to file it down once it's in a piece, even something as simple as this one. And you risk marring up the metals around it with your file. Always cut and file first, if you can.

This is just another example of what the bur can look like if it's not filed down once you remove it.

An example of how nice it can look finished.

Other reasons to dig out the files
A lot of the time, I disassemble filigree and stampings and only use the pieces I want. Any place you take the metal apart, there will be burs. Some of them can be pretty nasty, and can scratch skin and catch on clothes. I make sure all of the burs are filed down so it doesn't hurt the skin.
Note: Most of the metals I use have an oxidized finish, or a sterling finish. Any place you file will wear away the finish. The color underneath will show through, most of the time this will be the natural brass. (It's bright gold) You'll want to consider how this look will effect your piece. A lot of the time you can file it on the back and not so much on the front, or you can cover it up with other pieces of the necklace.
This isn't the greatest picture, but you can see the burs before, and the brass showing through after I filed it.


Some notes about filing metals -recap-
*When you file metals like these brass components, you'll get metal shavings, as fine as dust. You can see this metal dust on my fingers in some of the pictures. You can wear glasses, or a mask, if this concerns you. I am careful not to do it around my one year old son.
*Filing the metal will remove whatever finish is on it. The natural brass will show through, this is a bright gold, so make sure this doesn't ruin your design. A lot of the time, you can hide it, or if you have minimum filing to do, it might not be noticeable.
*Sometimes this type of thing can be rough on flush cutters, you can keep an old beat up pair around for these cases.
*Snip and file before construction, you'll thank yourself later.
*It's possible that the exposed brass from the filing, the raw brass with no finish, can turn skin green. I like to make sure that the part I file off isn't in direct contact with skin when it's worn.

These are examples of some of the necklaces I've made in the past using these techniques, removing the loops.
This necklace features a flat setting that once had a decorative loop at the top for hanging. I removed the loop, and used it as a simple bezel setting.

Removing the loop asn't essential for this piece, because I was covering it up, but I didn't want it in there so I removed it anyway.

I used a three way connector at the top of this piece, but removed all three loops.


All the settings and filigree used in this tutorial are from Vintage Jewelry Supplies.
Thanks for reading, I hope you learned something helpful!!!

Preview of what's to come

So as you know, I'm selling out my current inventory at 35% off, with coupon code REVAMP2012, to start fresh with a whole new line of jewelry this spring. Peacock Tres Chic will be closed for some time in March, while I prepare for a shop overhaul.
I thought I'd offer the curious visitors a little hint of whats to come this spring at Peacock Tres Chic. I'm not revealing any of the new pieces, sorry, you'll have to come back in March for that! But I will reveal a couple of my primary colors, and in a week or so, I'll reveal some of my main inspirations.
Swarovski crystal's new color, vintage pink, really struck me recently. It's so soft and romantic, and just gorgeous. This color is certainly a star in the new spring collection.
The lovely golden shadow, has always been a favorite of mine. It compliments so many other colors, and you can wear it with so many things. This color for me, was a must have.

Taking a bit of a back seat, but certainly not being upstaged, will be the occasional Burgundy. I just couldn't not use it. A sensual, romantic color that's a sure statement maker in any wardrobe.

And the ever versatile, bridal white crystal. There are some bridal pieces, I'm not going to lie. That's exciting, because it's not a genre I cater to often.

And also, pearls will be making a grand appearance. There's not a woman in the world who doesn't love pearls. Classy, sophisticated, timeless. Oh yes, there will be pearls.

Hope this glimpse into the future peeks your curiosity!

SALE!

You may have noticed that I haven't updated in quite some time. I've been working on so many other projects!
I'm clearing out Peacock Tres Chic! Next month, I'll be closing the shop for a little while, as I prepare for a major shop makeover. The stuff that you see for sale there now, will not be back! All new items will be coming to Peacock Tres Chic in March. So if there's something you've been thinking about getting, you had better get it before it's gone for good!
To help with this transition, and to offer a nice little Valentine's Day discount, everything in Peacock Tres Chic is 35% off!
Use coupon code REVAMP2012 to get 35% off your order!
Here's just a few of the lovelies that you can now get for 35% off!
La Belle Anne

Aurora

Heart of the Beast Blackened

Nightflyer


Just in case you missed that,
Everything at Peacock Tres Chic is 35% off with coupon code REVAMP2012 !